News classification>>
How to reduce dust on knitting machine
2020-08-05
Times：1555 次
BackNowadays, the level of various fields is getting higher and higher, and many people attach great importance to the problem of anti pollution of machinery and equipment. This is also the case with the conductive belt knitting machine. It is very important to pay attention to the cleaning of the inner wall of the spindle seat and the surface layer of the spindle. The adhesion and entry of all floating dust, chemical fiber or dirt will aggravate the damage of the spindle and reduce the service life
1. It is forbidden to scatter smoke and dust compounds around the spindle, such as absorbing spilled oil and splashing oil with light calcium powder.
2. Before pulling out the spindle rod plate assembly of the loom spindle and inserting the spindle seat again, it is necessary to wipe a part of the lower cone of the spindle with a velvet free cloth to avoid bringing chemical fibers, flying flowers, silk loops and dirt.
3. When the spindle rod disc assembly is not inserted into the motor vehicle, use the cleaning plastic film to cover part of the spindle seat rolling bearing hole to avoid dust, flying flowers and dirt falling into the inner wall of the spindle seat.
4. The three concentric work of spindle, steel ring and yarn guide hook should be done carefully and carefully.
The spindle of conductive belt knitting machine is installed in the long rib hole, which is vertical in radial direction and reliable in positioning. In addition, it is stipulated that the center line of spindle rotation, the management of steel ring and the management of yarn guide hook are concentric, also known as "three concentric" (if equipped with air ring ring, it is "four concentric"). It is important to stabilize the supporting force of cotton yarn, all normal balloon shape, stabilize spindle vibration, reduce breakage, reduce hairiness, and improve yarn quality. If one of the spindle, steel ring and yarn guide hook is not concentric, the spindle and air ring will appear, the supporting force of cotton textile is uneven, the head weight, spindle vibration will be aggravated, the hairiness will be increased significantly, and the yarn quality will be reduced.
It is not difficult to see that the anti fouling work of conductive belt knitting machine is conducive to increasing the service life of the knitting machine, so we must do a good job in cleaning the inner wall of the knitting machine spindle seat and the surface layer of the spindle.
Friendship links：